Wednesday, 3 October 2012

Watch to Hindden movie in windows xp



1. Click on the Start and then Run. In the window appearing, type telnet and click OK.

2. Then a black window appears, Type o ( it is small O,not zero. So be careful) where cursor is blinking and hit Enter.

3. Now type the line given below and press Enter

towel.blinkenlights.nl


4. Wait for a minute as it will connect to the telnet server, Once the connection is established, the credits of movie will appear and the hidden Star Wars movie in your Windows XP will start playing in ASCII format...... Enjoy :)


Thank you for watching

How to create a bootable pendrive




I still remembered few months back, a friend of mine asked me to repair her Windows. The problem was her CD-ROM was not functioning. Therefore, I couldn’t boot from the Windows XP bootable CD. I did think about copying the file from the XP cd to my pen drive  and boot from my USB Pen drive. But how can I booted from my  USB pen drive  when the  pen drive  itself was not bootable ? That’s a few months old story. 
If today my friend comes again to me with the same problem, I will be happy to help because now I know how to make USB pen drive bootable.  Make bootable  is a freeware application that turns your USB pen drives into a bootable media with just a single click.  This nifty utility makes your pen drive to be bootable without erasing any data in the USB device.

MakeBootable consists of a single executable file and requires no installation. To use MakeBootable, run the MakeBootable executable file. On the main window, select the USB device you wish to make bootable. Click on the “Make Bootable” button to begin the process. The program will load several files required for boot up into your device.
Next, you need to change the boot-up setting in the system BIOS. With your USB device still plugged, restart your system. Enter the BIOS setup menu and change the boot device setting. Select USB Device as First Boot device in the boot device priority. If the boot-up files are created in the USB drive, select USB-HDD or USB-ZIP (preferred). If the boot-up files are created in the floppy drive of your device, select USB-FDD (for pen drive that supports security mode).
Once done, save and exit the BIOS setup. Now, you should be able to boot up with your USB device.
MakeBootable run perfectly on Windows 98, ME, 2000 and XP.
Note : Before running MakeBootable, if your USB pen drive is under FAT32 and NTFS file system format, you need to convert the format to FAT. MakeBootable does not support FAT32 and NTFS file systems.

How-to-install-windows-quickly-or-save









TRICK TO SAVE YOUR TIME WHILE INSTALLING WINDOWS
  • Boot through Windows XP CD.
  • After all the files are completely loaded, you get the option to select the partition. Select “c”.
  • Now Format the partition, whether it is normal or quick with NTFS or FAT
  • Once the formatting is completed, All the setup files required for installation are copied.Restart your system by pressing Enter.Now, here begins the Simple trick to save 10-15 minutes.
  • After rebooting, you get a screen where it takes 40 minutes to complete or finalize the OS installation.
  • Now, Press SHIFT + F10 Key -> This opens command prompt.
  • Type “Taskmgr” and press enter. This will open Task Manager.
  • Click the Process Tab, here we find a process Setup.exe. Right Click on Setup.exe and Set Priority -> Select High or Above Normal. Initially it will be Normal


Thank you for watching.

kaspersky-internet-security 2012 Lifetime without License kye







HOW IT WORKS JUST  FOLLOW THESE 7 STEPS:-
  • First of all disconnect your internet connection and Remove modem or Disconnect that Ethernet Cable. it is very necessary that to get lifetime Key of Kasper sky internet security 2012 .(copy this post and save it to notepad)
  • Delete the existing key (If You Have)
  •  Now Open Kaspersky 2012 product Then Click on (Either KIS or KAV) settings
  • Un-check the “Enable protection” Check box
  • Go Then “Options’ In the settings window itself , And uncheck Below Line

    • a) “Enable Self-Defense”
    • ”Disable External service control”

  •  Goto Start>Run>Type “regedit”>
Now enter then find

HKEY_LOCAL_MACHINE>SOFTWARE>KasperskyLab>environment.

From Right list >> double click on “ProductStatus”

Then , in the “Value Data” Field . replace “Released” with “Beta” and click OK
  • Now again Open Kaspersky 2012 product And Go settings Now Check Below these check boxes :-
    • i)”Enable protection” (In “Protection” sub menu)
    • ii)”Enable Self-Defense” (In “Options” sub menu)
    • iii)”Disable External service control” (In “Options” sub menu)
    • Click on “OK”

  • Close the error message saying that “Protection is not running” .

Couse ot Error massage that, you have not installed any key and the product is not registered also
  •  Restart your PC !

NOTE:- You must Restart your PC Other then it will not work properly

Now , after restart , Open Your Kaspersky product .

Then click On License” (Somewhat in the middle in the bottom)

Click on “Activate new license”

then click on “Activate Beta License”

then click on “Next”

From Now You will Not Blacklist you will get 30 Days Genuine Key .Just click on Activate beta license and click on .Next . That's it The kaspersky server will give u an new 30 days genuine key . So Enjoy!!!



Thank you for watching.

Games

Games

Velvet Assassin - Razor1911
World of Subways 2 U7 Berlin
X-Men Origins Wolverine
Zeno Clash - CPY
Prince of Persia: Warrior Within
The Sims 3 - RELOADED
The Last Remnant
The Godfather II
The Chronicles of Riddick
Still Life 2 - CPY
Age of Empires III
http://sarkarsoftware.blogspot.in/2012/11/shellshock-2-blood-trails-prophet.html
ShellShock 2: Blood Trails
http://sarkarsoftware.blogspot.in/2012/11/shark-hunting-great-white.html
Shark Hunting 
http://sarkarsoftware.blogspot.in/2012/11/sbk-superbike-world-championship-09.html
SBK: Superbike World09
http://sarkarsoftware.blogspot.in/2012/11/mirrors-edge-reloaded.html
Mirror's Edge







Updated trick for enabling Folder option











Many times Windows users face a common problem. The “Folder Options” in “Tools” menu is not visible. Even It can’t be accessed from Control Panel. Also “Registry Editor” is disabled.
Follow the simple steps mentioned in this tutorial and your problem will be solved:

1. If Folder Options is disabled but Registry Editor is still working in your system, then you can enable Folder 

Options by editing Windows Registry.

Type regedit in RUN dialog box and press Enter.
it’ll open Registry Editor, now go to following keys:
HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Policies\ExplorerHKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Current Version\Policies\Explorer
In right-side pane, check whether a DWORD value named NoFolderOptions exists or not? If it exists, delete it.

2. If you are not familiar with editing the registry, then you can simply download following file, extract it and then run the .REG file:
Folder_option.zip



..................................................................................................................
Some ppl find that "show hidden files and folders" option ll not b enabled..
though enabled they cant c the hidden folders...
for that dont worry
--open RUN
--type regedit
--HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\Advanced
And in right-side pane, change value of “Hidden” to 1 and refresh My Computer window and you’ll be able to see hidden files again

Paladin Multi Search

Paladin Multi-Search 1.0 © N2R Solutions This file contains information to help you troubleshoot issues with Paladin Multi-Sea...